OrthoLine™ Fracture Management System

The OrthoLine fracture management system allows the surgeon to perform a fracture repair using screws compatible with the Arthrex TPLO system. The expansive, state-of-the-art straight, T-style, and anatomic plate fracture line includes sizes 1.6 mm, 1.6 mm broad, 2.0 mm, 2.4 mm, 3.0 mm, 3.5 mm, and 3.5 mm broad plating options are available for both feline and canine patients.

A variety of screw options are available for the system, including fully threaded headless compression screws, partially threaded screws, cannulated lag screws, low-profile screws, and QuickFix™ cannulated screws.

  • High screw density where needed
  • Anatomic plate designs
  • Strong plate for bridging
  • Low plate contact and low profile
  • Color coded for easier identification
  • K-wire holes
  • Cortical/locking/variable-angle locking screws
  • Indicated for sizes from small cats to large dogs
View More

The OrthoLine fracture management system allows the surgeon to perform a fracture repair using screws compatible with the Arthrex TPLO system. The expansive, state-of-the-art straight, T-style, and anatomic plate fracture line includes sizes 1.6 mm, 1.6 mm broad, 2.0 mm, 2.4 mm, 3.0 mm, 3.5 mm, and 3.5 mm broad plating options are available for both feline and canine patients.

A variety of screw options are available for the system, including fully threaded headless compression screws, partially threaded screws, cannulated lag screws, low-profile screws, and QuickFix™ cannulated screws.

  • High screw density where needed
  • Anatomic plate designs
  • Strong plate for bridging
  • Low plate contact and low profile
  • Color coded for easier identification
  • K-wire holes
  • Cortical/locking/variable-angle locking screws
  • Indicated for sizes from small cats to large dogs
View More
Sistema de manejo de fraturas OrthoLine™
Sistema de manejo de fraturas OrthoLine™
O sistema de manejo de fraturas OrthoLine permite que o cirurgião realize um reparo de fratura com os mesmos parafusos usados no sistema para TPLO. A linha para fraturas de última geração com 70 placas inclui os tamanhos 1,6 mm, 1,6 mm de largura, 2,0 mm, 2,4 mm, 3,0 mm e 3,5 mm para placas retas e em formato T e placas retas largas de 3,5 mm para pacientes felinos e caninos.
Projetadas com foco no cirurgião, as placas possuem diversos recursos para ajudar a criar um procedimento mais reproduzível: as placas retas bloqueantes incluem um orifício deslizante, que permite um leve movimento através da linha da fratura para facilitar o melhor posicionamento da placa. O design de perfil baixo reduz a proeminência sob a pele e limita o contato entre o osso e a placa. O tamanho e o comprimento da placa foram projetados especificamente para incluir o espaçamento entre orifícios.
A alta densidade de parafusos nas extremidades distal e proximal, com espaçamentos maiores perto do centro da placa, permite que os cirurgiões acomodem mais parafusos na mesma área em comparação com as placas concorrentes. Recursos adicionais projetados para auxiliar na colocação adequada da placa incluem orifícios para fio K, parafusos bloqueantes de ângulo variável para as linhas de titânio e orifícios deslizantes e de compressão. As placas OrthoLine podem ser moldadas pelo uso de modeladores de placa de tamanho específico e conectores de dobra canulados, que também podem funcionar como orifícios para fios K em qualquer orifício para parafuso bloqueante.
Além das novas placas para fraturas OrthoLine, o sistema de manejo de fraturas inclui diversas opções de parafusos, incluindo parafusos de compressão sem cabeça totalmente rosqueáveis, parafusos parcialmente rosqueáveis, parafusos interfragmentários canulados, parafusos de perfil baixo e parafusos canulados QuickFix™.
• Alta densidade de parafusos sempre que necessário
• Orifícios deslizantes e de compressão
• Placa resistente para ligação
• Pouco contato da placa com o osso e perfil baixo
• Codificado por cores para facilitar a identificação
• Orifícios para fio K
• Parafusos bloqueantes corticais/de ângulo variável
• Indicado para gatos pequenos a cães grandes
OrthoLine™ Acetabular Fracture System
OrthoLine™ Acetabular Fracture System
The OrthoLine acetabular fracture plating system, part of the OrthoLine plating system, includes an extended‑length locking drill guide for hard‑to‑reach anatomy. Each veterinary plate is anatomically contoured to mimic the anatomy of patients within a given size range, including 1.6 mm, 2.0 mm, 2.4 mm (short and standard), and 3.0 mm (standard and broad). Screw trajectories are optimized to maximize bone purchase throughout the cranial, central, and caudal regions of the acetabulum while improving screw pullout strength. These trajectories differ from most veterinary orthopedic plates, which typically use perpendicular screw holes only. Each screw hole also features a hood that aids thread purchase and helps reduce soft‑tissue irritation.
As with all products in the OrthoLine plating system, users have the option to use cortical, locking, and variable‑angle locking screws. OrthoLine acetabular plates also include K‑wire holes for provisional fixation, suture holes for prosthetic capsulorrhaphy, and an iliofemoral suture hole, offering versatility within a comprehensive veterinary fracture plate system.

Key Features:

• Anatomically precontoured plates reduce operative time
• Defined screw trajectories maximize bone purchase and minimize pullout
• Dedicated suture holes aide in soft-tissue management and closure
• Hooded screw holes increase thread engagement and minimize soft-tissue irritation
• Extended locking drill guide for hard-to-reach anatomy
OrthoLine™ Bridge Plate Fracture System
OrthoLine™ Bridge Plate Fracture System
The OrthoLine bridge plate system expands the OrthoLine plating system to deliver a complete solution for both routine and complex fractures. With the addition of veterinary bridge plates, surgeons gain seamless compatibility with existing instrumentation while expanding their options for challenging cases. These advantages lead to stronger patient outcomes and reinforces the OrthoLine system as an all-in-one veterinary plate solution. This veterinary bridge plate system is typically used to provide stability for nonreducible and complex fractures.
Features and Benefits
• Four locking screws on each end for secure stability
• Customizable length with cuttable holes for length-specific applications
• K-wire holes for provisional fixation
• Low-profile design for minimal prominence
• Designed to accommodate FiberTape® cerclage for adjunctive support
OrthoLine™ Cuttable Plate System
OrthoLine™ Cuttable Plate System
The cuttable straight plates are designed to offer multiple options and applications for veterinary orthopedic surgery. Each plate features three tight hole-to-hole spacings on either end, followed by a bridge on one side and a transition hole. Additionally, there is another set of three tight hole-to-hole spacings on the side with the bridge. The central hole spacing is larger, allowing for in-plane bending of approximately 7° to 8° before deformation of the screw hole occurs. This design provides flexibility and precision in various surgical scenarios.
The cuttable T-plates are designed to be placed in a juxta-articular fashion and cut to size. The design includes a 3-hole T on one side and a 2-hole T on the opposite side, following a bridge design with uniform hole-to-hole spacing throughout centrally. The central hole spacing allows for in-plane bending of up to 7° to 8°. This design ensures adaptability and precise placement in complex orthopedic procedures.
Sistema de fraturas distais do úmero OrthoLine™
Sistema de fraturas distais do úmero OrthoLine™
O sistema de fraturas distais do úmero OrthoLine é a primeira placa de seu tipo a incorporar um parafuso transcondilar para fraturas distais mediais, supracondilianas, em forma de Y e em forma de T do úmero.
Projetadas com foco no cirurgião, as placas distais para úmero OrthoLine são anatômicas, incorporando o parafuso transcondilar no reparo e incluindo uma trajetória específica para auxiliar na colocação adequada do parafuso transcondilar. Os parafusos são compatíveis com toda a linha de placas OrthoLine e com o sistema para TPLO da Arthrex. Os produtos estão disponíveis nos tamanhos de placas de 1,6 mm/2,0 mm, 2,4 mm, 3,0 mm e 3,5 mm/4,0 mm para pacientes felinos e caninos.
Repare fraturas mediais, supracondilares, em formato de Y e em formato de T com um reparo de placa única, utilizando um fio K no aspecto lateral para fraturas em formato de Y e T ao posicionar a placa medialmente. O orifício oval epicondilar ajuda o cirurgião a encontrar o local certo para facilitar a melhor colocação da placa e fornece alívio para o epicôndilo.
Sistema de osteotomia de fêmur distal OrthoLine™
Sistema de osteotomia de fêmur distal OrthoLine™
O sistema de osteotomia de fêmur distal OrthoLine™ da Arthrex incorporou sugestões de cirurgiões e as características chave de engenharia para um design inovador específico para a anatomia de pequenos animais. A linha de placas de última geração inclui vários recursos principais.
• Design anatômico
• Alta densidade de parafusos sempre que necessário
• Trajetórias específicas dos parafusos
• Pouco contato da placa com o osso, extremidades cônicas e perfil baixo
• Codificado por cores para facilitar a identificação
• Orifícios para fio K
• Parafusos bloqueantes corticais/de ângulo variável
• Orifício de sutura para facilitar o fechamento e o suporte do tecido mole
Sistema de reparo de fraturas OrthoLine™
Sistema de reparo de fraturas OrthoLine™
O sistema de reparo de fraturas do fêmur OrthoLine™ da Arthrex inclui dois designs anatômicos inovadores para o fêmur. Os sistemas de placas proximal e distal para o fêmur foram projetados com a contribuição de cirurgiões e características chave de engenharia. Específica para pacientes de pequeno porte, essa linha de placas de última geração inclui diversas características importantes.
• Design anatômico
• Alta densidade de parafusos sempre que necessário
• Trajetórias específicas dos parafusos
• Pouco contato da placa com o osso, extremidades cônicas e perfil baixo
• Codificado por cores para facilitar a identificação
• Orifícios para fio K
• Parafusos bloqueantes corticais/de ângulo variável
• Orifício de sutura para facilitar o fechamento e o suporte do tecido mole
Sistema de placas para fratura ilíaca OrthoLine™
Sistema de placas para fratura ilíaca OrthoLine™
O sistema de placas para fratura ilíaca OrthoLine inclui tamanhos de 1,6 mm, 2,0 mm, 2,4 mm, 3,0 mm e uma placa longa adicional de 3,5 mm para cães maiores. O tamanho de cada placa é anatomicamente moldado para imitar a anatomia dos pacientes de determinada faixa de tamanhos. A placa inclui trajetórias de parafusos cranialmente divergentes para melhorar a fixação no íleo cranial. As trajetórias do parafuso caudal são orientadas mais dorsalmente para ajudar a diferir da articulação coxofemoral. Além disso, a placa ilíaca inclui um orifício de sutura pareado com o VetSuture da Arthrex para aposição da musculatura glútea no fechamento.
Características e benefícios
• Trajetórias diferentes dos parafusos cranianos para maior resistência à tração
• Trajetórias do parafuso caudal divergindo da articulação coxofemoral
• Projetado para padrões de fratura craniana, caudal e oblíqua
• Design de placa anatômica com opções esquerda e direita
• Alta densidade de parafusos sempre que necessário
• Orifício de sutura para auxiliar no fechamento do tecido mole
• SParte inferior festonada para distribuir a tensão e minimizar o contato
Sistema de placas para fratura radial OrthoLine™
Sistema de placas para fratura radial OrthoLine™
O sistema de placas para fratura radial OrthoLine™ da Arthrex inclui tamanhos de 1,6 mm, 2,0 mm, 2,4 mm, 3,0 mm e 3,5 mm. Cada placa é anatomicamente moldada para imitar a anatomia dos pacientes de determinada faixa de tamanhos. O sistema foi projetado com trajetórias de parafusos distais multiplanares e parafusos proximais centralmente alinhados no osso para melhorar a resistência à extração dos parafusos. As placas são mais finas que uma placa em formato T padrão ou uma placa reta, proporcionando menos interferência no tecido mole. A base tubular permite melhor conformidade com a estrutura óssea do paciente e aumenta o tempo de inércia da área. Este design exclusivo também inclui uma ponte de extensão da fratura, com um orifício para parafuso de compressão que fornece compressão no sítio da fratura, guias de flexão e diversos orifícios para fio K para auxiliar na colocação preliminar. As placas são projetadas para um posicionamento cranialmedial, mas um posicionamento craniallateral pode ser usado com a placa lateral contralateral.
Características e benefícios:
• Parafusos distais multiplanares
• Trajetórias dos parafusos proximais para alinhamento central no osso
• Projetada para fraturas radiais distais
• Design de placa anatômica com opções esquerda e direita
• Alta densidade de parafusos sempre que necessário
• Design cônico para evitar irritação de tecidos moles
• Orifício de compressão
• Ponte de extensão da fratura
• Duas opções de colocação
Cannulated Screw System
Cannulated Screw System
QuickFix™ Cannulated Screw System
The screws are indicated for use in bone reconstruction, osteotomy, arthrodesis and fracture repair of bones appropriate for the size of the device.
Complete Set – Full range of partially threaded, titanium, self-drilling and tapping headed cannulated screw options, in 2 mm, 2.4 mm, 3 mm and 4 mm diameters and fully threaded variable stepped pitch 2.5 mm and 3.5 mm headless Compression FT screws.
Best Material – Titanium screws with Type II anodization to provide consistent strength, biocompatibility and superior post-op imaging.
Novel Instrumentation – Triple Plays (all-in-one near cortex drill, Countersink and Depth Device)
Hexalobe Drive – Superior driver engagement with less potential for screw stripping. Note: 2.5 Micro Compression FT™ screw has 1.5 mm Hex Driver.
Key Features and Benefits:
• Variable Stepped Thread Pitch – The screw tip’s wider thread pitch enters the bone faster than trailing threads, gradually compressing the fragments as the screw is advanced
• Headless – The titanium screws can be implanted intra-articular and extra-articular with minimal risk of impingement or soft tissue irritation
• Cannulation – Assists in accurate placement for both percutaneous and open indications
The screws are intended for intra-articular and extra-articular fractures and non-unions of small bones and small bone fragments: arthrodesis of small joints and osteotomies.
Compression FT Screw System
Compression FT Screw System
The titanium Compression FT (fully-threaded) screws come in 2.5 Micro, 3.5 Mini, and 4.0 Standard. The variable-stepped thread pitch and headless design help reduce the risk of profile complications, provide compression and allow for simplified insertion. Surgeons can now achieve zero-profile, stable fixation.
Compression PT Screw System
Compression PT Screw System
2.5 and 3.0 mm Headless Compression PT Screws
The 2.5 mm and 3.0 mm titanium Headless Compression PT screws can be used for fixation of osteotomies, fusion, or fracture fixation in the foot/ankle, hand/wrist, and elbow. The screws provide compression due to different thread pitches at the head of the screw and at the distal thread of the screw. A hexalobe recess provides improved torque transmission and allows for simplified insertion. For Weil osteotomies, 2.0 mm snap-off QuickFix™ screws are included in the 2.5 mm and 3.0 mm Headless Compression PT Screw System (AR-8610S-01), completing a comprehensive solution for the forefoot.
Features of 2.5 and 3.0 mm Headless Compression PT screws:
• Headless design
• Self-drilling and self-tapping
• Hexalobe drive (2.5 mm = T7; 3.0 mm = T8)
• Cannulated
• Titanium
• Color-coded instruments
• Short and long guidewires (80 mm or 120 mm) available
• Distal thread lengths = ⅓ of overall screw length
• Lengths of 2.5 mm screws: 8 mm to 34 mm
• Lengths of 3.0 mm screws: 10 mm to 36 mm
4.3 and 6.5 mm Headless Compression PT Screws
The 4.3 mm and 6.5 mm titanium Headless Compression PT screws can be used for the fixation of osteotomies, fusions, or fracture fixation in the mid- and hindfoot. The headless design helps reduce the risk of profile complications, provide compression, and allow for simplified insertion.
Features of 4.3 and 6.5 mm Headless Compression PT screws:
• Headless design
• Self-drilling and self-tapping
• Hexalobe drive (4.3 mm = T15; 6.5 mm = T25)
• Cannulated
• Titanium
• Color-coded instruments
• Guidewires: 1.35 mm x 170 mm (4.3 mm screws)
2.4 mm x 170 mm (6.5 mm screws)
• 4.3 mm screws: distal thread length = ⅓ of overall screw length
• Lengths of 4.3 mm screws: 14 mm to 50 mm (x2)
55 mm to 80 mm (x5)
• Lengths of 6.5 mm screws: 30 mm to 120 mm (x5) (18 mm Short Thread)
60 mm to 120 mm (x5) (28 mm Long Thread)
QuickFix™ Cannulated Screw System
QuickFix™ Cannulated Screw System
QuickFix Cannulated Screw System
The screws are indicated for use in bone reconstruction, osteotomy, arthrodesis, and fracture repair of bones appropriate for the size of the device.
Complete Set: Full range of partially threaded, titanium, self-drilling, and self-tapping cannulated screw options, in 2 mm, 2.4 mm, 3 mm and 4 mm diameters and fully threaded variable-stepped pitch 2.5 mm and 3.5 mm headless Compression FT screws.
Best Material: Titanium screws with type II anodization to provide consistent strength, biocompatibility, and superior post-op imaging.
Novel Instrumentation: Triple play (all-in-one near cortex drill, countersink, and depth device)
Hexalobe Drive: Superior driver engagement with less potential for screw stripping (note: 2.5 Micro Compression FT™ screw has 1.5 mm hex driver)
Key Features and Benefits
• Variable Stepped Thread Pitch: The screw tip’s wider thread pitch enters the bone faster than trailing threads, gradually compressing the fragments as the screw is advanced
• Headless: The titanium screws can be implanted intra-articular and extra-articular with minimal risk of impingement or soft-tissue irritation
• Cannulation: Assists in accurate placement for both percutaneous and open indications
The screws are intended for intra-articular and extra-articular fractures and nonunions of small bones and small bone fragments, arthrodesis of small joints, and osteotomies.
Low Profile Screws
Low Profile Screws
The Low Profile System (LPS), a complete screw and instrument set. The LPS 2 mm, 2.3 mm, 3 mm Screw Set includes the 2 mm and 3 mm QuickFix "snap off" screws, the 2.3 mm cannulated, and solid screws along with the new 3 mm cannulated partially threaded screws. The square instrument tray is only 9.5 x 9.5 x 2 inches deep and includes a screw system with four low profile fixation options.
Features and Benefits
• Low Profile Head – 1 mm shorter than a traditional AO 6.5 mm screw, while still using a 3.5 mm hex
• Deeper Threads – Using a 2.4 mm guide pin allows the threads to be deeper than a standard AO screw
• Longer Threads – 18 mm and 28 mm thread lengths Self-Drilling, Tapping – Speed up the insertion process
• Assisted Targeting – Parallel and C-Ring Pin Guides enable quick and accurate placement
RetroFusion™ Screws
RetroFusion™ Screws
Not just an ordinary headless implant, the RetroFusion implant is a headless implant designed for arthrodesis, which provides compression and strength across the joint. The implant’s proximal and distal threads are arranged in opposite directions, which pull the joint together when the implant is inserted.
• Opposing threads on the implant pull the joint together for maximum compression of the joint
• Better fixation of the joint due to actual compression achieved
• Simple technique, which also allows for flexed fusions
Fracture Reduction System
Fracture Reduction System
The OrthoLine™ fracture reduction system simplifies bone fracture relocation or transfer stability and aligns with the OrthoLine fracture management system. The strong, lightweight, carbon fiber, radiolucent lobster claw allows imaging-guided fracture reduction procedures that do not require removing clamps. The reduction forceps with guidewire holds a small bone in apposition during a fracture reduction. The clamp can help with insertion of cannulated screw guidewires.
OrthoLine™ 1.4 mm Plating System
OrthoLine™ 1.4 mm Plating System
Designed specifically for small-patient fracture fixation, the OrthoLine 1.4 mm plating system delivers the precision and reliability needed for the most delicate cases.
Featuring straight plates and T-plates, two complementary screw sizes, and purpose-built instrumentation, the system provides a comprehensive fixation platform tailored to the unique demands of small animal surgery.
Features and Benefits:
• 1.4 mm cuttable straight plates with 29 holes
• 1.4 mm cuttable T-plates with 22 holes
• Variable screw hole configuration for flexibility to address a range of fracture patterns
• Two screw sizes for intraoperative flexibility
• 1.4 mm variable-angle locking screws
• 1.2 mm cortical screws
• Enhanced screw caddy with holding sleeve for in-place screw measurement that enables precise placement
• Drill bits designed for various bone densities so surgeons can choose fixation based on bone quality, not just implant size
OrthoLine™ Arthrodesis Plating System
OrthoLine™ Arthrodesis Plating System
The OrthoLine arthrodesis plating system features a dedicated line of arthrodesis plates engineered specifically for carpal and tarsal joint fusion in small animals. Designed to address the demanding biomechanics of the distal limb, these plates deliver the strength, stability, and anatomical fit needed to support predictable arthrodesis outcomes.
Whether managing end-stage osteoarthritis, chronic ligament instability, traumatic injury, or congenital deformities, surgeons can rely on these versatile implants for pancarpal or pantarsal fusion procedures.
Anatomically contoured to match common carpal and tarsal standing angles, the plates help maintain ideal distal limb alignment and support long-term function. The system offers both locking and nonlocking screw options, allowing surgeons to tailor fixation based on patient size, bone quality, and surgical approach.
Features and Benefits
• Anatomically precontoured plates help reduce operative time
• Dedicated suture holes aid in soft-tissue management and closure
• Titanium construction
• Supplied sterile and ready to use
• Compression locking screw hole slot
How can we help you?
‌‌‌
Connect With Us
‌
‌‌‌‌‌‌‌
‌
‌
‌
‌
‌
‌
Arthrex Vet Systems Logo© 2026 Arthrex, Inc. All rights reserved.v4.0.1
‌