Finished Product

VAR-4000-10

Vet Systems - Small Animal

Product

The OrthoLine™ fracture reduction system simplifies bone fracture relocation or transfer stability and aligns with the OrthoLine fracture management system. The strong, lightweight, carbon fiber, radiolucent lobster claw allows imaging-guided fracture reduction procedures that do not require removing clamps. The reduction forceps with guidewire holds a small bone in apposition during a fracture reduction. The clamp can help with insertion of cannulated screw guidewires.

Fracture Reduction System

Child (D)

The OrthoLine fracture management system allows the surgeon to perform a fracture repair with the same screws used in the TPLO System. The 70-plate, state-of-the-art fracture line includes sizes 1.6 mm, 1.6 mm broad, 2.0 mm, 2.4 mm, 3.0 mm, and 3.5 mm for straight and T-style plates and 3.5 mm broad straight plates for both feline and canine patients.
Designed with the surgeon in mind, the plates have many features to help create a more reproducible procedure: The locking straight plates include a slide hole, which allows slight movement across the fracture line to facilitate the best plate placement. The low-profile design reduces prominence under the skin and features, limiting bone-to-plate contact. Plate size and length were specifically designed to include hole-to-hole spacing.
Tight screw density on the distal and proximal ends with larger bridges near the center of the plate allows surgeons to fit more screws in the same footprint than competitive plates. Additional features designed to aid in proper plate placement include K-wire holes, variable-angle locking screws for the titanium lines, slide holes, and compression holes. OrthoLine plates can be contoured using size-specific bending irons and cannulated bending plugs, which can also function as K-wire holes in any locking screw hole.
In addition to the new OrthoLine fracture plates, the fracture management system includes a variety of screw options, including fully threaded headless compression screws, partially threaded screws, cannulated lag screws, low-profile screws, and QuickFix™ cannulated screws.
<ul>
 <li>High screw density where needed</li>
 <li>Slide and compression holes</li>
 <li>Strong plate for bridging</li>
 <li>Low plate contact and low profiled</li>
 <li>Color coded for easier identification</li>
 <li>K-wire holes</li>
 <li>Cortical/locking/variable-angle locking screws</li>
 <li>Indicated for sizes from small cats to large dogs</li>
</ul>

OrthoLine™ Fracture System

The cuttable straight plates are designed to offer multiple options and applications for veterinary orthopedic surgery. Each plate features three tight hole-to-hole spacings on either end, followed by a bridge on one side and a transition hole. Additionally, there is another set of three tight hole-to-hole spacings on the side with the bridge. The central hole spacing is larger, allowing for in-plane bending of approximately 7° to 8° before deformation of the screw hole occurs. This design provides flexibility and precision in various surgical scenarios.&nbsp;
 
The cuttable T-plates are designed to be placed in a juxta-articular fashion and cut to size. The design includes a 3-hole T on one side and a 2-hole T on the opposite side, following a bridge design with uniform hole-to-hole spacing throughout centrally. The central hole spacing allows for in-plane bending of up to 7° to 8°. This design ensures adaptability and precise placement in complex orthopedic procedures.

OrthoLine™ Cuttable Plate System

O sistema de fraturas distais do úmero OrthoLine é a primeira placa de seu tipo a incorporar um parafuso transcondilar para fraturas distais mediais, supracondilianas, em forma de Y e em forma de T do úmero.
 
Projetadas com foco no cirurgião, as placas distais para úmero OrthoLine são anatômicas, incorporando o parafuso transcondilar no reparo e incluindo uma trajetória específica para auxiliar na colocação adequada do parafuso transcondilar. Os parafusos são compatíveis com toda a linha de placas OrthoLine e com o sistema para TPLO da Arthrex. Os produtos estão disponíveis nos tamanhos de placas de 1,6 mm/2,0 mm, 2,4 mm, 3,0 mm e 3,5 mm/4,0 mm para pacientes felinos e caninos.
 
Repare fraturas mediais, supracondilares, em formato de Y e em formato de T com um reparo de placa única, utilizando um fio K no aspecto lateral para fraturas em formato de Y e T ao posicionar a placa medialmente. O orifício oval epicondilar ajuda o cirurgião a encontrar o local certo para facilitar a melhor colocação da placa e fornece alívio para o epicôndilo.

Freer Elevator

VAR-4000-10

Páginas Relacionadas

Small Animal

Fracture Reduction System

Produto

Small Animal

OrthoLine™ Fracture System

Produto

Small Animal

OrthoLine™ Cuttable Plate System

Produto

Small Animal

Sistema de fraturas distais do úmero OrthoLine™

Produto