The Horizon 24 Flex AV is a user-friendly centrifuge with included rotors, cups, and spacers. The unit has 3 preset cycles for your ACP and IRAP ProEAS needs; one setting for both “set” and “lock” controls; and LED lid lighting to indicate cycle status. Designed, built, and supported in the US.

Orthobiologics

Vet Systems - Orthobiologics

Operation of the Drucker Horizon 24 Flex centrifuge is demonstrated for the preparation of autologous conditioned plasma (ACP).

Not Hidden

English  - en

video

Human

A video walk though on a specific topic providing details on intended use.

Ein Video, das ein bestimmtes Thema behandelt und Details zum Verwendungszweck enthält.

Video-Anleitungen

Vídeo explicativo sobre um tópico específico, fornecendo detalhes sobre o uso pretendido.

Vídeo tutoriais

Video explicativo sobre un tema específico que proporciona detalles sobre el uso previsto.

Video tutoriales

Video Tutorials

Drucker Horizon 24 Flex Operation

Operation. Unlock the lid by pressing the unlock button. The red unlock light will illuminate in an audible signal will sound. Ensure that the two buckets are located opposite each other, are of the same material, and have the blue spacers inside. Place the ACP double syringe into the bucket. Balance the load with the ACP counterweight in the opposite bucket from the ACP double syringe. If two syringes are to be centrifuged simultaneously, do not use the counterweight. Instead, place a second ACP double syringe in the opposite bucket from the first ACP double syringe. Close the lid and turn the lid knob clockwise to its complete stop position. If ACP is listed on the digital screen, proceed if another protocol is listed on the digital screen. Press the cycle button repeatedly until the ACP cycle is selected. Press the start button on the control panel to start the spin cycle. The lid will lie and the centrifuge will increase speed until it reaches the set spin speed, and then the timer will begin its countdown from the preset time. When the ACP spin cycle is completed, an audible signal will sound. The LED light will flash and the rotor will slow to a complete stop. A series of three audible signals will sound, and the locking mechanism will disengage for 60s, allowing entry into the rotor chamber. If the lid is not opened within 60s, it will relock. Press the unlock button to access the rotor chamber. If this happens, turn the lid knob counterclockwise to open the lid. The lid light will turn off the ACP. Double syringe may now be safely removed. Take care to maintain the vertical orientation of the ACP double syringe to protect the separation between the plasma and red blood layer. Please consult Drucker. Horizon 24 Flex Manual for additional specifications, cleaning, maintenance and troubleshooting information as needed.

Drucker Horizon 24 Flex Features

The Drucker Horizon 24 flex centrifuge is a cost effective, easy to manage and simple to use system for producing leukocyte poor PRP with the Arthrex ACP double syringe. For clinicians who are processing ACP serum, the centrifuge provides unparalleled ease of use with a pre-programmed ACP cycle, eight additional customizable spin cycles, and both auditory and visual cycle indicators. Drucker offers made in the USA quality, and the horizon 24 flex centrifuge comes with a two year warranty. Displays. The top display alternates between the name of the cycle and the currently selected speed. The bottom display shows the time setting and progress through the cycle. Cycle presets. The first two cycles are conveniently preset and labeled ACP. This setting is factory preset to 1500 rpm at five minutes. Adipose. This setting is factory preset to 2500 rpm at four minutes. Customize and label up to eight additional cycles for time, speed and braking. Indicators. Lid lighting indicates the centrifuges status. Ready. Running. Done. A traditional audible alert also indicates the completion of the cycle. The visual and audible cues inform the operator when the cycle is complete and samples are ready. Safety and servicing. A clear lid permits safe observation of samples and optical calibration of speed. The lid safety system prevents the centrifuge from operating unless the lid is closed and latched, and allows entry into the centrifuge only after the rotor has completely stopped. Cool flow design uses ambient air to keep specimens at room temperature, which prevents overheating of samples. The high power brushless motor provides years of operation with no routine maintenance.

Drucker Horizon 24 Flex Setup

Initial setup. Unpack and verify that all the following are included. Centrifuge power cord two buckets. Two blue spacers. Operating manual. Set up the centrifuge on a flat and level surface 21in or 54cm of bench top clearance. Height is required to open the lid 6in or 15cm of clear space on all sides is required for unencumbered airflow. 60 to 90°F, or 16 to 32°C is the recommended temperature range for centrifuge operation. Plug the power cord into the centrifuge. Plug the power cord into an approved electrical outlet. Turn on the power to the centrifuge with the power switch on the back. The displays in the front of the centrifuge will light up and default to the ACP cycle. Press the cycle button to select the desired cycle. Unlocks the lid to allow access into the rotor chamber. Entry is only possible when the rotor is stopped. Pressing the unlock button during operation will terminate the cycle and unlock the lid. After the rotor has come to a stop begins rung the cycle displayed on the screen. The lid must be closed.

Arthrex ACP Double Syringe, Vet with Double Syringe and Cap

Horizon 24 Flex

Recursos educativos y productos

Todos los recursos

Todos los productos

Videos

Idiomas

Video tutoriales (3)

Drucker Horizon 24 Flex Operation

Drucker Horizon 24 Flex Features

Drucker Horizon 24 Flex Setup

Instrumentos (2)

00389-129-001K

VAR-1025

Syringes (1)

VAR-1200S