Bohrer, mit AO-Anschluss, 2.3 mm, kurz, Vet

Finished Product

VAR-4030SD

Depth Device, 2.7/ 3.5/ 4.0 mm, Low Profile, Vet

Tiefenmesser für 2.7 mm / 3.5 mm / 4.0 mm Schrauben, Vet

Depth Device, 2.7 / 3.5/ 4.0 mm, Low Profile, VET

Dispositivo de profundidad, bajo perfil, 2,7 / 3,5 / 4 mm,VET

Dispositivo de profundidade, 2,7 mm / 3,5 mm / 4,0 mm, baixo perfil, VET

3.0 mm OrthoLine Screw Caddy - VAL

3.0 mm  OrthoLine Screw Caddy - VAL, VET

General OrthoLine Sterilization Case&nbsp;

General OrthoLine Sterilization Tray, VET

General OrthoLine Sterilization Case Insert, VET

General OrthoLine Sterilization Case Insert

Bohrhülse mit Gewinde, winkelstabil, 3.0 mm, Vet

Drill / Depth Guide, Locking, 3.0 mm, VET

Gewindeschneider / Bohrhülse, 3.0 mm / 2.3 mm, Vet

Bohrhülse für variabel winkelstabile Schrauben, 3.0 mm, Vet

Screw Holding Forceps, Self-Retaining, Vet

Screw Holding Forceps, Self-Retaining, VET

Pinça de fixação de parafusos, auto-retentora, VET

Hohmann-Retraktor, Low Profile, 8 mm, Vet

Vet Systems - Small Animal

Product

The Arthrex Vet MPL plates follow the same anatomic engineering aspects of the Tibial Plateau Leveling Osteotomy (TPLO) Plating System with additional features to address medial patella luxation.&nbsp; The MPL plate includes a step to offset the fragment from the long bone of the tibia creating medial tibial plateau translation and a locking screw distal to the cut protecting the osteotomy.&nbsp; The plates are also designed to have proximal and distal locking holes to be less prominent under the skin. Proximal screw holes with specific trajectories within the proximal fragment. The distal end has limited bone contact and is designed with two k-wire holes to aid in positioning, the plates are also contoured to the bone, marked with a laser line for optimal positioning and step location. Additionally, the plates include a suture hole proximally for the application of an InternalBrace™ ligament augmentation, providing rotational stability. Finally, the distal end of the plate incorporates VetSuture holes on the cranial aspect to aid in soft tissue closure.&nbsp; The Arthrex Vet MPL Plating System has been created by veterinarians for veterinarians making a more reproducible procedure for happier and healthier patients.&nbsp; 
 
Size range includes 1.6 mm, 2.0 mm, 2.4 mm, 2.7 mm, 3.0 mm, 3.5 mm small, 3.5 mm standard, and 3.5 mm broad in left and right options.
 
Key Features and Benefits
<ul>
 <li>Step to offset the fragment including slight torsional rotation on smaller sizes</li>
 <li>Proximal screw trajectories avoid the joint</li>
 <li>Distal suture hole to aid in soft tissue closure</li>
 <li>Scalloped underside to distribute stress and minimize contact</li>
 <li>Proximal suture hole to support rotational stability</li>
 <li>Multiple K-wire holes allow surgeons to choose what is best for the patient</li>
 <li>Distal locking hole to protect the osteotomy site</li>
 <li>Laser line represents the location of the step</li>
 <li>Anatomic plate design with left and right options</li>
</ul>

OrthoLine™ Medial Patella Luxation (MPL) System

Child (D)

The Arthrex OrthoLine™ distal femur osteotomy system incorporated surgeon input with key engineering features for an innovative design that is specific to small animal anatomy. The state-of-the-art plating line includes several key features.
&nbsp;
<ul>
 <li>Anatomic design</li>
 <li>High screw density where it's needed</li>
 <li>Specific screw trajectories</li>
 <li>Low plate-to-bone contact, tapered ends, and low profiled</li>
 <li>Color-coded for easy identification</li>
 <li>K-wire holes</li>
 <li>Cortical/locking/variable-angle locking screws</li>
 <li>Suture hole to facilitate soft-tissue closure and support</li>
</ul>

OrthoLine™ Distal Femur Osteotomy System

The Arthrex OrthoLine™ radial fracture plate system includes 1.6 mm, 2.0 mm, 2.4 mm, 3.0 mm, and 3.5 mm sizes. Each plate is anatomically contoured to mimic the anatomy of patients within a given size range. The system is designed with multiplanar distal screw trajectories and proximal screws centrally aligned within the bone to improve screw pullout. The plates are thinner than a standard T-plate or straight plate, providing less soft tissue interference. The tubular bottom enables better conformity to the patient’s bone structure and increases the area moment of inertia. This unique design also includes a fracture-spanning bridge with a compression screw hole providing compression across the fracture site, bending plugs, and several k-wire holes to assist in preliminary placement. The plates are designed for a cranial-medial placement, but a cranial-lateral placement can be used with the contralateral side plate.
&nbsp;
Features and Benefits
<ul>
 <li>Multiplanar distal screws</li>
 <li>Proximal screw trajectories to align centrally in the bone</li>
 <li>Designed for distal radial fractures</li>
 <li>Anatomic plate design with left and right options</li>
 <li>High screw density where needed</li>
 <li>Tapered design to avoid soft tissue irritation</li>
 <li>Compression hole</li>
 <li>Fracture-spanning bridge</li>
 <li>Two placement options</li>
</ul>

OrthoLine™ Radial Fracture System

The cuttable straight plates are designed to offer multiple options and applications for veterinary orthopedic surgery. Each plate features three tight hole-to-hole spacings on either end, followed by a bridge on one side and a transition hole. Additionally, there is another set of three tight hole-to-hole spacings on the side with the bridge. The central hole spacing is larger, allowing for in-plane bending of approximately 7° to 8° before deformation of the screw hole occurs. This design provides flexibility and precision in various surgical scenarios.&nbsp;
 
The cuttable T-plates are designed to be placed in a juxta-articular fashion and cut to size. The design includes a 3-hole T on one side and a 2-hole T on the opposite side, following a bridge design with uniform hole-to-hole spacing throughout centrally. The central hole spacing allows for in-plane bending of up to 7° to 8°. This design ensures adaptability and precise placement in complex orthopedic procedures.

OrthoLine™ Cuttable Plate System

The Arthrex OrthoLine™ femur fracture system includes two innovative anatomic femur designs. The proximal femur plate and distal femur plate systems were designed with surgeon input and key engineering features. Specific to small animal patients, the state-of-the-art plating line includes several key features.
&nbsp;
<ul>
 <li>Anatomic design</li>
 <li>High screw density where it's needed</li>
 <li>Specific screw trajectories</li>
 <li>Low plate-to-bone contact, tapered ends, and low profile</li>
 <li>Color-coded for easier identification</li>
 <li>K-wire holes</li>
 <li>Cortical/locking/variable-angle locking screws</li>
 <li>Suture hole to facilitate soft-tissue closure and support</li>
</ul>

OrthoLine™ Femur Fracture System

El sistema de placas para fracturas ilíacas OrthoLine incluye tamaños de 1,6 mm, 2,0 mm, 2,4 mm, 3,0 mm y una placa adicional de 3,5 mm de longitud para perros grandes. Cada tamaño de placa se moldea de forma anatómica para imitar la anatomía de los pacientes dentro de un rango de tamaños. La placa incluye trayectorias de tornillo divergentes craneales para mejorar la estabilidad en el ilio craneal. Las trayectorias de tornillo caudales tienen una orientación más dorsal para ayudar a alejarse de la articulación coxofemoral. Además, la placa ilíaca incluye un orificio para sutura con VetSuture de Arthrex para la aposición de la musculatura del glúteo al cierre.
&nbsp;
Características y ventajas:
<ul>
 <li>Trayectorias de tornillos craneales divergentes para una mayor fuerza de salida</li>
 <li>Trayectorias de tornillos caudales para alejarse de la articulación coxofemoral</li>
 <li>Diseñado para patrones de fractura craneales, caudales y oblicuos</li>
 <li>Diseño de placa anatómico con opciones derecha e izquierda</li>
 <li>Alta densidad de tornillo donde se la necesite</li>
 <li>Orificio para suturas para ayudar con el cierre del tejido blando</li>
 <li>Lado inferior ondulado para distribuir la fricción y minimizar el contacto</li>
</ul>

Sistema de placas para fracturas ilíacas OrthoLine™

Kirschner wires, or K-wires, are used for temporary fixation during some orthopedic operations. After definitive fixation, they should be removed.
 
Use K-wires to:
<ul>
 <li>Help rotate the proximal bone fragment</li>
 <li>Hold the rotated proximal bone fragment in place during the TPLO procedure</li>
 <li>Secure jig pin to the bone</li>
 <li>Hold the TPLO plate during placement</li>
</ul>

TPLO Disposables and Limited Reusables

Desarrollado pensando en los cirujanos y sus equipos, el set TPLO de Arthrex incluye el instrumental estándar requerido y varios instrumentos nuevos diseñados específicamente para ayudar a crear un procedimiento TPLO más reproducible.
 
El estuche puede contener placas TPLO, una caja para tornillos con guía de medición e instrumental, lo que hace que esta bandeja sea ideal para guardar equipos e implantes juntos, si así lo desea. Personalice su paquete TPLO ideal con el nivel inferior, que tiene espacio para otros instrumentos. El tamaño del estuche está pensado para las esterilizaciones por autoclave más comunes.
 
El diseño de la placa de bloqueo TPLO de 2,0/2,4 mm de Arthrex es producto de un extenso proceso de investigación y desarrollo. Las características importantes permiten que la colocación sea más sencilla y consistente. Esta no es una versión más pequeña de las placas TPLO de Arthrex: se diseñó específicamente para anatomías óseas de razas pequeñas.
<ul>
 <li>La placa ofrece la opción de una técnica de estabilidad lateral sin nudos y antirrotativa (aumentación de ligamentos InternalBrace™) para los perros con inestabilidad grave</li>
 <li>A los cirujanos les encanta el ajuste y el perfil de la placa y la inclinación caudal es muy buena para el anclaje del tornillo</li>
 <li>La trayectoria del tornillo proximal está dirigida para evitar la osteotomía</li>
 <li>Se requiere una adaptación al contorno mínima</li>
 <li>El código por color facilita la identificación de implantes e instrumentos</li>
</ul>

Drill Bit Short, Solid, AO, 2.3 mm

VAR-4030SD

VAR-4030SD pertenece a Establecer artículos de (2)

VAR-3130S-01

VAR-4030S

Páginas Relacionadas

Small Animal

OrthoLine™ Medial Patella Luxation (MPL) System

Producto

Small Animal

OrthoLine™ Distal Femur Osteotomy System

Producto

Small Animal

OrthoLine™ Radial Fracture System

Producto

Small Animal

OrthoLine™ Cuttable Plate System

Producto

Small Animal

OrthoLine™ Femur Fracture System

Producto

Small Animal

Sistema de placas para fracturas ilíacas OrthoLine™

Producto

Small Animal

TPLO Disposables and Limited Reusables

Producto

Small Animal

Sets y estuches para TPLO

Producto