Depth Device, 2.7/ 3.5/ 4.0 mm, Low Profile, Vet

Tiefenmesser für 2.7 mm / 3.5 mm / 4.0 mm Schrauben, Vet

Depth Device, 2.7 / 3.5/ 4.0 mm, Low Profile, VET

Dispositivo de profundidad, bajo perfil, 2,7 / 3,5 / 4 mm,VET

Dispositivo de profundidade, 2,7 mm / 3,5 mm / 4,0 mm, baixo perfil, VET

Finished Product

VAR-8943-15

3.0 mm OrthoLine Screw Caddy - VAL

3.0 mm  OrthoLine Screw Caddy - VAL, VET

VAR-3030SC-01

VAR-4000-08

VAR-4000BPC

General OrthoLine Sterilization Case&nbsp;

General OrthoLine Sterilization Tray, VET

VAR-4000GC

General OrthoLine Sterilization Case Insert, VET

General OrthoLine Sterilization Case Insert

VAR-4000GC-01

VAR-4030-04

VAR-4030D

Bohrhülse mit Gewinde, winkelstabil, 3.0 mm, Vet

Drill / Depth Guide, Locking, 3.0 mm, VET

VAR-4030DG

Bohrer, mit AO-Anschluss, 2.3 mm, kurz, Vet

VAR-4030SD

Gewindeschneider / Bohrhülse, 3.0 mm / 2.3 mm, Vet

VAR-4030TDG

Bohrhülse für variabel winkelstabile Schrauben, 3.0 mm, Vet

VAR-4030VDG

Screw Holding Forceps, Self-Retaining, Vet

Screw Holding Forceps, Self-Retaining, VET

Pinça de fixação de parafusos, auto-retentora, VET

VAR-8941F

VAR-8943-08

VAR-8944DH

VAR-3130S-01

Vet Systems - Small Animal

Product

The cuttable straight plates are designed to offer multiple options and applications for veterinary orthopedic surgery. Each plate features three tight hole-to-hole spacings on either end, followed by a bridge on one side and a transition hole. Additionally, there is another set of three tight hole-to-hole spacings on the side with the bridge. The central hole spacing is larger, allowing for in-plane bending of approximately 7° to 8° before deformation of the screw hole occurs. This design provides flexibility and precision in various surgical scenarios.&nbsp;
 
The cuttable T-plates are designed to be placed in a juxta-articular fashion and cut to size. The design includes a 3-hole T on one side and a 2-hole T on the opposite side, following a bridge design with uniform hole-to-hole spacing throughout centrally. The central hole spacing allows for in-plane bending of up to 7° to 8°. This design ensures adaptability and precise placement in complex orthopedic procedures.

OrthoLine-Instrumentenset, 3.0 mm